FCA US DODGE JOURNEY 2020 Page 265 Owner'S Manual Download

Page: 265 / 404

TECHNICAL SPECIFICATIONS

263

WHEEL AND TIRE TORQUE SPECIFICATIONS

Proper lug nut/bolt torque is very important to

ensure that the wheel is properly mounted to

the vehicle. Any time a wheel has been removed

and reinstalled on the vehicle, the lug nuts/

bolts should be torqued using a properly cali-

brated torque wrench using a high quality six

sided (hex) deep wall socket.

Torque Specifications

**Use only authorized dealer recommended

lug nuts/bolts and clean or remove any dirt or

oil before tightening.
Inspect the wheel mounting surface prior to

mounting the tire and remove any corrosion or

loose particles.

Wheel Mounting Surface

Tighten the lug nuts/bolts in a star pattern until

each nut/bolt has been tightened twice. Ensure

that the socket is fully engaged on the lug nut/

bolt (do not insert it halfway).

Torque Patterns

After 25 miles (40 km), check the lug nut/bolt

torque to be sure that all the lug nuts/bolts are

properly seated against the wheel.

FUEL REQUIREMENTS

This engine is designed to meet all

emissions regulations and provide

optimum fuel economy and perfor-

mance when using high quality

unleaded “Regular” gasoline having a posted

octane number of 87 as specified by the

(R+M)/2 method. The use of higher octane

“Premium” gasoline is not required, as it will not

provide any benefit over “Regular” gasoline in

these engines.

Lug Nut/Bolt

Torque

**Lug Nut/

Bolt Size

Lug Nut/Bolt

Socket Size

100 Ft-Lbs

(135 N·m)

M12 x 1.5

19 mm

WARNING!

To avoid the risk of forcing the vehicle off the

jack, do not tighten the lug nuts/bolts fully

until the vehicle has been lowered. Failure to

follow this warning may result in personal

injury.

20_JC_OM_EN_USC_t.book Page 263

Summary of Contents for DODGE JOURNEY 2020





















































































































































































































































































































































































































Search results

Summary of Contents for DODGE JOURNEY 2020

Reviews:

Related manuals for DODGE JOURNEY 2020

Brands by name

Popular brands

FCA US DODGE JOURNEY 2020, Owner'S Manual

Search results

Summary of Contents for DODGE JOURNEY 2020

Reviews:

Related manuals for DODGE JOURNEY 2020

Brands by name

Popular brands