VAIE 2000 | Voice Alarm Integrated Systems
System Manual | 2013
UK
VAC 2006 • VAR 2006
3. WARnInGS
3.1 PoWER SuPPLY And EARtHInG
This equipment is designed to run on a mains voltage of 230 V ± 10% 50/60 Hz. The ON/OFF switch (
R1
) switches the mains voltage on and
off. The equipment is supplied with a power cable that has an earth wire. The earth terminal of the mains plug must not be removed under
any circumstances. Connect the mains plug (
R14
) of the device to the power mains using only the cable supplied with the equipment, which is
equipped with a noise-suppressor. Make sure that the power outlet has an earth connection in accordance with the law. The power circuit of the
VAC 2006
is protected by a fuse on the mains plug of the device.
3.3 InStALLAtIon
All
FBt
equipment is made according to the strictest international safety standards and complies with European Community requirements.
For correct and effective use of the equipment, it is important to be aware of all its characteristics by reading carefully these instructions and
especially the safety notes. It is necessary to ensure adequate ventilation while the equipment is in use, and to leave the side ventilation slit for
the cooling fans unobstructed. Do not position the equipment inside a cabinet without ventilation and keep it away from sources of heat. The
equipment can be mounted in FBT standard 19” racks.
3.2 SAFEtY notES
Any activities inside the equipment, such as maintenance operations and so on, must be carried out solely by specialised personnel. When
the cover is removed, parts become accessible that entail a risk of electric shocks. Always make sure that the power cable is unplugged from
the outlet before removing the cover. If any liquid is accidentally spilt onto the equipment, unplug it immediately from the mains and contact
the nearest
FBt
Service Centre. In case of rack installation, it is required to connect the (
R13
) connection to the to rack frame by means of
a cable as short as possible (about 20cm). It’s also possible to connect other equipments for the sole purpose of shielding low-level signals.
This socket must not be used for the safety connection of the frame to earth.
Important information for correct disposal of the product in accordance with EC directive 2002/96/EC
This product must not be disposed of as urban waste at the end of its working life. It must be taken to a special waste collection centre
licensed by the local authorities or to a dealer providing this service. Separate disposal of electric and/or electronic equipment (WEEE)
will avoid possible negative consequences for the environment and for health resulting from inappropriate disposal, and will enable the
constituent materials to be recovered, with significant savings in energy and resources. As a reminder of the need to dispose of this
equipment separately, the product is marked with a crossed-out wheeled dustbin.
this product is in keeping with the relevant European Community directives.
