System Manual | 2013
VAIE 2000 | Voice Alarm Integrated Systems
VAC 2006 • VAR 2006
UK
8.4.1.5 PoWER SuPPLY FAuLtS
Power supply and display memory diagnostics
From the FAULTS panel (point 8.4.1), press numerical key
4
to access the
panel for viewing the diagnostics of the primary and secondary power supplies
and of the memory for managing the display.
The diagnostic state of each item monitored is reported, as shown in the
following table.
Press ESC to return to the FAULTS panel.
Label
Part being diagnosed
Cause
Action required
All
All
Ok
No failures
-
N.T.
NOT TEST. Diagnostics disabled
during configuration (See Menu
set> BACkGROUND TEST)
-
Res.
Failure cleared due to previous
failure signal
Access the Report> FAULTS panel from
the OPERATOR menu and carry out a
MANUAL RESET of the FAILURE signal.
Contr. mains
Primary power supply
of the controller
@230V
ac
Fault
Primary power supply of the
controller not detected
Check the 230 VAC power supply, the
connecting cable and the mains fuse.
If the failure persists, contact the Service
Centre.
Contr. 24VDC
Secondary power
supply of the controller
@24V
dc
Secondary power supply of the
controller not detected
Check the 24 VDC power supply, the
connecting cable and the mains fuse.
If the failure persists, contact the Service
Centre.
3-Rtr/VAI mains
Primary power supply
of the router/VAIE 2250
@230V
ac
Primary power supply of the
router or VAIE 2250 not detected
Check the 230 VAC power supply, the
connecting cable and the mains fuse.
If the failure persists, contact the Service
Centre.
4-Rtr/VAI 24VDC
Secondary power
supply of the router/
VAIE2250 @24V
dc
Secondary power supply of the
router or VAIE 2250 not detected
Check the 24 VDC power supply, the
connecting cable and the mains fuse.
If the failure persists, contact the Service
Centre.
Ctr display
Controller display
Fault
Upset detected on display
Contact the Service Centre.
VAIE display
VAIE 2250 display
Fault
Upset detected on display
Contact the Service Centre.
Tab. 8.4.1.5
