VAIE 2000 | Voice Alarm Integrated Systems
System Manual | 2013
UK
VAC 2006 • VAR 2006
• Creation of an Sd card
Once you have completed all the configuration activities, all the information must be downloaded to an SD card, which will then be plugged into
the appropriate controller.
one Sd card must be created for each controller in the system. Each single card will contain the information
relating both to the specific controller and to the rest of the system.
After making sure that CONTROLLER 0 is switched off, use a screwdriver to unscrew the small cover at the centre of the rear panel and remove
it.
At this point, the main window of the programme will show most of the settings made:
It is possible to obtain a complete printable report of all the settings simply by clicking on
‘Ctr configuration report’, ‘Zone configuration report’
and
‘Spare configuration report’.
Insert the SD into the drive of the PC, then select the CONTROLLER 0 window. From the main menu, select
tools > Create SD
. The card will
be formatted and then automatically programmed with the necessary data.
Once writing has been completed, remove the SD card from the PC, then plug it into its slot in the rear panel of CONTROLLER 0. Put the cover
back into place and fix it with the screws removed earlier.
Repeat these operations for all the other controllers (in the example, CONTROLLER 1).
