XL-1S Hookup and Installation Instructions
9–2
EXAMPLES:
Zone 1 ON, Zones 2-5 OFF
= QUESTION 01
Zone 1 ON, Zone 2 ON, Zones 3-5 OFF
= QUESTION 03
Zone 2 ON, Zone 3 ON, Zone 4 ON, Zones 1 and 5 OFF = QUESTION 14
Location Contents = System Status LEDs
The remaining status LEDs (ARM, STAY, INSTANT, AC/LB) display the DATA that resides
in EACH location within the current question. As per the diagram which follows and
explanation above, the value located next to each LED must be ADDED to calculate the total
data, for each location.
EXAMPLES:
Arm ON, Stay, Instant, and AC/LB OFF
= 1
Arm ON, Stay ON, Instant and AC/LB OFF
= 3
The following chart displays binary values that you will see on these LEDs for the letters A-F
which may be entered in some locations of the program sheet.
A
10
Stay & AC/LB = ON
B
11
Arm, Stay, & AC/LB = ON
C
12
Instant, & AC/LB = ON
D
13
Arm, Instant, & AC/LB = ON
E
14
Stay, Instant, & AC/LB = ON
F
15
Arm, Stay, Instant, & AC/LB = ON
What You See On The LCD Keypad
Upon entering the installer keypad programming following display will appear:
QUES:01
L:01
DATA= 1
The display shows the current question number (QUES), the location within the question (L:)
and the current value within that location (DATA =). This corresponds to the programming
worksheet.
How to Enter Data
This section of the manual describes the physical keystrokes to enter the data written on the
program sheet.
Movement
Between
Questions
System program mode starts with question 1 displayed. RANDOM
JUMPS TO ANY QUESTION CAN BE MADE BY PRESSING THE *
(ASTERISK) BUTTON AND THE 2 DIGIT QUESTION NUMBER.
Questions can be accessed randomly or sequentially.
Example: Jump to question 07= Press * 0 7
The proper question number will be displayed by the zone LEDs and the
other status LEDs will display the contents of the FIRST location in that
question.
Movement
Within
Questions
The zone LEDs display the question number and the other status LEDs
display the contents (data) within each location. MOVEMENT FROM
LOCATION L1 TO THE NEXT LOCATION WITHIN ANY QUESTION
CAN BE PERFORMED BY PRESSING THE # (POUND) BUTTON.
The other status LEDs will display the contents of each location as this
button is pressed.
Data Entry
To alter the value in any location, enter the desired DIGIT from the
program sheet, and press the # button.
Summary of Contents for XL-1S
