manualshive.com logo in svg

FBII XL-1S, Hookup And Installation Instructions

Share
Download
FBII XL-1S Hookup And Installation Instructions Download Page 49

Section 8 - System Programming

8–15

burglary or 24 hour zones by enabling this code (entry of any code except A) and enabling
transmit zone restores in question #07, location 2. Entry of an A means that restores of
any type are not transmitted. If a two digit dialer format has been programmed, the
restore code will be followed by the programmed second digit of the zones code. NOTE:
Restore is not selectable by zone.

Question 18, L3 - Trouble Code

Default = F

L3 is the single digit system TROUBLE CODE reported to the central station. This code
will be reported on DAY TROUBLE and any FIRE TROUBLE. If a two digit format has
been programmed then this code will be followed by the second digit of the respective
zones code.

Question 18, L4 - Cancel Code

Default = 8

L4 is the single digit system CANCEL CODE reported to the central station. This code
will be sent if after a violation of a controlled zone, a user code is entered. If the zone is
still violated, entry of a user code will transmit the cancel code. If the zone is
programmed for restoral, then the restore code will be transmitted when the loop status
has returned to normal. An entry of A in this field indicates that cancel codes are not
transmitted. In formats requiring 2 digits, the user number functions as the second digit.
NOTE: An option exists to make the Cancel Code Bell Ringback either AUDIBLE or
SILENT (see question #04, location 4).

QUESTION 19
CS CODES for KEYPAD FIRE and KEYPAD AUXILIARY

DEFAULT = AAAA

There are 4 locations L1-L4 in this question.

Question 19, L1 & L2 - Keypad Fire Code

Default = AA

L1 - L2 is the alarm code that will be transmitted upon activation of the keypad fire
condition. This code can vary from any of the zones that are programmed as fire.

Question 19, L3 & L4 - Keypad Auxiliary Code

Default = AA

L3 - L4 is the code transmitted to the CS for keypad aux. condition.

QUESTION 00
INSTALLER CODE

DEFAULT = 2468

There are 4 locations L1 - L4 in this question. Enter any 4 digit (0-9 installer code desired).
This code is used to ENTER the system programming mode via the keypad.

Typically each installing company would use a unique installer code in order to
prevent unauthorized people from gaining access to their panels.

Summary of Contents for XL-1S








































































Reviews:

No comments

Brands by name

Popular brands

Load more brands