![background image](http://html1.mh-extra.com/html/fbii/xl-1s/xl-1s_hookup-and-installation-instructions_547073036.webp)
XL-1S Hookup and Installation Instructions
8–2
QUESTION 02
SECONDARY TELEPHONE NUMBER
DEFAULT = AAAAAAAAAAAA
Enter the telephone number (including area code and/or dialing prefix IF NECESSARY) of
the secondary central station receiver in L1 - L12.
Enter the valid digits from the table in question 01. The secondary telephone number will be
used if the panel is unable to reach the Central Station via the primary number. This is
known as BACKUP reporting. If the SPLIT REPORTING feature is programmed, then
OPENING and CLOSING signals will be directed to the secondary CS number only, while all
other conditions will be reported to the primary number.
If neither split nor backup reporting is necessary then this question may be left as factory
defaulted and all conditions will be routed to the Primary Telephone number only.
QUESTION 03
CALLBACK TELEPHONE NUMBER
DEFAULT = AAAAAAAAAAAA
Enter the telephone number (including area code and/or dialing prefix if necessary) for this
control panel to reach the callback location. The callback number is the optional location of
the EZ-Mate Downloader where the control panel will call during a remote communications
(upload/download etc) session. During remote communications the programming device and
the control panel will first confirm the CS security code. If valid, communications can begin.
If a callback number is defined, the control panel will the hang up and dial the callback
number. Enter the valid digits from the table in question 01. NOTE: For no callback
capability enter AAAAAAAAAAAA.
QUESTION 04
DIALER OPTIONS
DEFAULT = 1601
There are 4 locations (L1-L4) within this question which define various dialer and system
options as follows:
Question 04, L1
Dialer Formats
DEFAULT = 1
Enter the digit for the desired dialer format from the table below in location L1. NOTE: The
checkmark highlights which options are selected.
DIALING FORMAT
Digit
PULSE
TOUCH-TONE
CS REPORTING FORMAT
0
9
STANDARD OR 4X2
1
9
STANDARD OR 4X2
8
DIALER DISABLE
LOCAL ALARM ONLY
NOTE: See Question #04,
location 3 to select specific
CS Reporting Format
Message Length and
specific Dialing Pulse Type.
If Local Alarm is desired, then no other options need to be disabled (Telephone #, CS Codes).
Question 04, L2
CS Receiver Type
Default = 6
Enter the digit for the desired receiver type from the table below in location L2. NOTE: The
checkmark highlights which options are selected.
FORMAT PULSE SPEED
HANDSHAKE FREQUENCY
Digit
10 PPS
20 PPS
40 PPS
1400 HZ
2300 HZ
PARITY
TYPICAL CS RECEIVER
0
9
9
FBI, ADEMCO, SILENT KNIGHT
1
9
9
9
FBI
2
9
9
FBI
3
9
9
9
FBI
Summary of Contents for XL-1S
