FBII XL-1S, Hookup And Installation Instructions

Page: 9 / 71

1–1
S E C T I O N 1
Introduction
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
The XL-1S Security System is a state of the art microprocessor-based control/communicator.
Programming can be performed through any of the compatible keypads or the system can be
uploaded and downloaded remotely using the EZ-Mate PC Downloader Software. In addition,
remote control actions (arming, disarming, bypassing, etc.) can be performed by the software.
Programming options are stored in non-volatile reprogrammable EEPROM memory and that
information which has been programmed will not be lost in the event of a complete loss of
power. Other features of the XL-1S include:
•
5 Zones (4 fully programmable plus a wired panic zone or keyswitch zone)
•
2 types of compatible keypads (LCD & LED, four wire devices with up to four per system)
•
6 user codes with capability for ambush code
•
Fast Loop Response (10 msec) selectable by zone
•
NFPA 72 Bell Supervision
•
CS Test Timer Offset
•
English readout keypads available
•
Upload/Download with remote commands with answering machine bypass
•
Default Lockout option to prevent hostile account takeovers
•
Indications on keypad for AC loss, Low Battery and Communication Failure
•
Central Station reporting for Alarms, Troubles, Restores, Bypasses, Openings, Closings,
Ambush, Panic, 24HR. Test, Cancels, AC loss, and Low Battery
•
Can be programmed as a Local System (No CS Reporting)
•
4 wire smoke detectors with Fire Verification logic plus smoke power reset
•
Exit Error Warning
•
European Ring Detect
•
2 programmable trigger outputs for various functions (including armed/ready indication
and glass break detector reset)
•
Input Power: 12VAC 20VA; 12VDC, 4 - 7 AH
•
Output Power: 11.5 - 13.1VDC, 500mA
•
Bell Output Power: 10 - 15.5VDC, 1A