Fayat Group Bomag BVT 65 Operating Instruction, Maintenance Instruction Download

Page: 70 / 97

8.7 Annually

8.7.1 Adjusting the valve clearance

NOTICE!
Danger of engine damage!

We recommend to have this work carried out by

trained personnel or our after sales service.

–

Before checking the valve clearance let the engine

cool down.

Valve clearance:

Intake valve (IN)

0.15 mm (0.006 in)

Exhaust valve (EX)

0.20 mm (0.008 in)

Protective equipment:

Working clothes

Protective gloves

Park the machine in secured condition

Chapter 6.4 ‘Park

the machine in secured condition.’ on page 55

Let the engine to cool down to ambient temperature.

Disassembling the recoil starter.

Preparations

Fig. 52

Pipe clamp

Screw M6x12 with washer

Screw M6x8

Screw M6x16 with washer

Maintenance – Annually

BVT 65

Go to

Discount-Equipment.com

order your parts

Summary of Contents for Bomag BVT 65


































































































Search results

Summary of Contents for Bomag BVT 65

Reviews:

Related manuals for Bomag BVT 65

Brands by name

Popular brands

Fayat Group Bomag BVT 65, Operating Instruction, Maintenance Instruction

Search results

Summary of Contents for Bomag BVT 65

Reviews:

Related manuals for Bomag BVT 65

Brands by name

Popular brands