Fayat Group Bomag BVT 65 Operating Instruction, Maintenance Instruction Download

Page: 40 / 97

5.1 Notes on safety

If the following tests reveal damages or other faults, the machine

must not be operated, until these deficiencies have been corrected.

Safety installations and switches must neither be removed nor

must they be made ineffective.

Do not change any fixed settings.

WARNING!
Health hazard caused by fuels and lubricants!

–

Safety regulations and environmental protection

regulations when handling fuels and lubricants

must be followed

Chapter 3.4 ‘Handling fuels

and lubricants’ on page 23

WARNING!
Danger of injury caused by rotating parts!

–

Before starting work on the machine make sure

that the engine can not be started.

Park the machine in secured condition

Chapter 6.4 ‘Park

the machine in secured condition.’ on page 55

Check prior to start up – Notes on safety

BVT 65

Go to

Discount-Equipment.com

order your parts

Summary of Contents for Bomag BVT 65


































































































Search results

Summary of Contents for Bomag BVT 65

Reviews:

Related manuals for Bomag BVT 65

Brands by name

Popular brands

Fayat Group Bomag BVT 65, Operating Instruction, Maintenance Instruction

Search results

Summary of Contents for Bomag BVT 65

Reviews:

Related manuals for Bomag BVT 65

Brands by name

Popular brands