manualshive.com logo in svg

Fayat Group Bomag BVT 65, Operating Instruction, Maintenance Instruction

The Fayat Group Bomag BVT 65 is a high-performance construction machine designed to provide efficient operations in various environments. Our website offers free downloads of the Operating Instruction and Maintenance Instruction manuals, ensuring that users have comprehensive guidance for the machine's optimal performance and longevity.

Share
Download
background image

5.4  Checking the fuel level, topping up fuel

DANGER!
Danger to life caused by explosive gas-air mixes!

–

Do not allow gasoline to come into contact with hot

components.

–

Smoking and open fire is prohibited.

–

Keep away from heat sources, sparks and other

sources of ignition.

–

Do not spill any gasoline.

NOTICE!
Danger of engine damage!

–

Monitor the entire refuelling process.

–

Contaminated fuel can cause malfunction or even

damage of the engine. If necessary, fill in fuel

through a screen filter.

–

Use only fuel of the permitted specification

Ä

 Chapter 8.2.2 ‘Fuel’ on page 65

.

Protective equipment:

n

Working clothes

n

Protective gloves

1.

Park the machine in secured condition

 

Ä

 Chapter 6.4 ‘Park

the machine in secured condition.’ on page 55

.

2.

Clean the area around the filler opening.

3.

Remove the tank filler cap.

4.

Fill in fuel through a funnel with screen filter.

5.

Close the fuel tank tightly.

Fig.  19

Check prior to start up – Checking the fuel level, topping up fuel

 

BVT 65

 

45

Go to

Discount-Equipment.com 

to

order your parts

Summary of Contents for Bomag BVT 65


































































































Reviews:

No comments

Related manuals for Bomag BVT 65

Brands by name

Popular brands

Load more brands