Fayat Group Bomag BVT 65 Operating Instruction, Maintenance Instruction Download

Page: 60 / 97

8.1 Preliminary remarks and safety notes

DANGER!
Danger to life caused by an operationally unsafe

machine!

–

The machine must only be serviced by qualified

and authorized personnel.

–

Follow the safety regulations for maintenance work

Chapter 3.9 ‘Maintenance work’ on page 31

WARNING!
Health hazard caused by fuels and lubricants!

–

Safety regulations and environmental protection

regulations when handling fuels and lubricants

must be followed

Chapter 3.4 ‘Handling fuels

and lubricants’ on page 23

Thoroughly clean machine and engine before starting main-

tenance work.

For all maintenance work park the machine is secured condi-

tion

Chapter 6.4 ‘Park the machine in secured condition.’

on page 55

Wear your personal protective outfit.

Do not touch hot engine parts.

Generally perform maintenance work only with the engine

shut down and the spark plug socket disconnected.

After all maintenance work is completed reinstall all guards

and safety installations.

Maintenance – Preliminary remarks and safety notes

BVT 65

Go to

Discount-Equipment.com

order your parts

Summary of Contents for Bomag BVT 65


































































































Search results

Summary of Contents for Bomag BVT 65

Reviews:

Related manuals for Bomag BVT 65

Brands by name

Popular brands

Fayat Group Bomag BVT 65, Operating Instruction, Maintenance Instruction

Search results

Summary of Contents for Bomag BVT 65

Reviews:

Related manuals for Bomag BVT 65

Brands by name

Popular brands