Fayat Group Bomag BVT 65 Operating Instruction, Maintenance Instruction Download

Page: 16 / 97

CAUTION!
Danger of injury if failing to comply!

Sections marked accordingly indicate a dangerous sit-

uation that could lead to fatal or severe injuries, if this

warning is disregarded.

NOTICE!
Danger of material damage if failing to comply!

Sections marked accordingly indicate possible dangers

for machines or components.

Sections marked accordingly indicate technical infor-

mation or notes on using the machine or its compo-

nents.

ENVIRONMENT!
Environmental damage if failing to comply!

Paragraphs marked accordingly indicate practices for

safe and environment-friendly disposal of fuels and

lubricants as well as replacement parts.

3.1.3 Personal protective equipment

Depending on the work to be carried out, personal protective equipment is required (to be provided

by the operating company):

Working clothes

Tight fitting working clothes with low tear resistance, tight

sleeves and without any projecting parts protects against

being caught by moving components.

Safety shoes

To protect against heavy falling parts and slipping on

slippery ground.

Protective gloves

To protect the hands against excoriation, punctures or

deep injuries, against irritating and caustic substances

as well as against burns.

Concerning your safety – General prerequisites

BVT 65

Go to

Discount-Equipment.com

order your parts

Summary of Contents for Bomag BVT 65


































































































Search results

Summary of Contents for Bomag BVT 65

Reviews:

Related manuals for Bomag BVT 65

Brands by name

Popular brands

Fayat Group Bomag BVT 65, Operating Instruction, Maintenance Instruction

Search results

Summary of Contents for Bomag BVT 65

Reviews:

Related manuals for Bomag BVT 65

Brands by name

Popular brands