Fayat Group Bomag BVT 65 Operating Instruction, Maintenance Instruction Download

Page: 23 / 97

3.4.2 Safety regulations and environmental protection regulations for handling oil

WARNING!
Danger of burning by ignited oil!

–

Do not allow oil to come into contact with hot com-

ponents.

–

Smoking and open fire is prohibited!

–

Wear your personal protective equipment (protec-

tive gloves, protective clothing).

CAUTION!
Health hazard caused by contact with oil!

–

Wear your personal protective equipment (protec-

tive gloves, protective clothing).

–

Do not inhale any oil vapours.

–

Avoid contact.

CAUTION!
Danger of slipping on spilled oil!

–

Immediately bind spilled oil with an oil-binding

agent.

ENVIRONMENT!
Oil is an environmentally hazardous substance

–

Always keep oil in proper containers.

–

Immediately bind spilled oil with an oil-binding

agent.

–

Dispose of oil and oil filter according to regulations.

Fig. 4

Concerning your safety – Handling fuels and lubricants

BVT 65

Go to

Discount-Equipment.com

order your parts

Summary of Contents for Bomag BVT 65


































































































Search results

Summary of Contents for Bomag BVT 65

Reviews:

Related manuals for Bomag BVT 65

Brands by name

Popular brands

Fayat Group Bomag BVT 65, Operating Instruction, Maintenance Instruction

Search results

Summary of Contents for Bomag BVT 65

Reviews:

Related manuals for Bomag BVT 65

Brands by name

Popular brands