Fayat Group Bomag BVT 65 Operating Instruction, Maintenance Instruction Download

Page: 58 / 97

7.2 Lashing the machine to the transport vehicle

Do not use damaged or in any other way impaired lashing points.

Always use appropriate lifting and lashing means on the lifting and

lashing points.

Use lifting and lashing gear only in the prescribed direction of load

application.

Lifting tackle must not be damaged by machine components.

Protective equipment:

Protective gloves

WARNING!
Danger of burning on hot components!

–

Wear your personal protective equipment (protec-

tive gloves, protective clothing).

Lean the tamper foot against the side wall of the transport

vehicle.

Fasten the tamper on the transport vehicle with at least two

lashing belts.

Fig. 42

Loading/transporting the machine – Lashing the machine to the transport vehicle

BVT 65

Go to

Discount-Equipment.com

order your parts

Summary of Contents for Bomag BVT 65


































































































Search results

Summary of Contents for Bomag BVT 65

Reviews:

Related manuals for Bomag BVT 65

Brands by name

Popular brands

Fayat Group Bomag BVT 65, Operating Instruction, Maintenance Instruction

Search results

Summary of Contents for Bomag BVT 65

Reviews:

Related manuals for Bomag BVT 65

Brands by name

Popular brands