FAST & FLUID MANAGEMENT srl
A Unit of Idex Corporation
2
ENGLISH
1. INTRODUCTION
SO300 by FAST & FLUID MANAGEMENT is the result of the most recent technology in high speed paint
mixing. Your SO300 by FAST & FLUID MANAGEMENT is a sturdy and effective shaker; its way of operating
and its design show all quality of a careful engineering work on the product.
To appreciate fully and protect your investment, we suggest that you take some time to read this manual.
As usual, FAST & FLUID MANAGEMENTwill support you post sales assistance service.
The few maintenance operations, which will be mentioned further on, shall be carried out regularly.
FAST & FLUID MANAGEMENT will not be held responsible for any damage or accident
which might happen because of failure to respect the regulations set, or because of
wrong use or of maintenance carried out without the standard safety rules
being
followed, as explained further on.
SO300 shaker must not be switched on if it has not been earthed through one or both the
earthing connection points (socket and/or earthing bolt).
2. INTELLECTUAL PROPERTY RIGHTS
Statement on Intellectual Property Rights.
The information contained in this manual is based on data which belong to FAST & FLUID MANAGEMENT.
This manual has been drawn up expressly for assistance in the use and general maintenance of SO300 shaker.
The publication of this info does not give any allowance for reproducing or using this manual for other than installation, use
or maintenance.
No part of this manual can be reproduced, translated or filed (neither on computer) in any form or by any means without
written authorization by a FAST & FLUID MANAGEMENT officer.
3. TECNICHAL SPECIFICATIONS
EN 292 Part 1 and 2: 1991
Safety of machinery - Fundamentals, general principles for design
EN 418: 1992
Safety of machinery – Emergency stop equipment, functional aspects
EN 60204 Part 1: 1997
Safety of machinery – Electrical equipment of machines - specifications on general aspects .
EN 954 – 1: 1996
Safety of machinery – Safety of parts of the control system – Part 1: general principles for design
EN 1088: 1995
Safety of machinery
EN 294: 1992
Safety of machinery – Safety distance to avoid damages in areas of the machines that are reachable by
upper limbs.
EN 953: 1997
Safety of machinery - Protections – Requirements on design and construction of mobile and/or fixed
protections.
PrEN 12757-1
Mixing/shaking machines for coating products;
EN 61000-6-3 Parte 6-3 2001
EN 61000-6-1 2001
EN 61000-3-2 2000
EN 61000-3-3 1995+A1 2001
Electromagnetic Compatibility Directiv (EMC) – Part 3: Limits – Section 2:
Maximum noise level :
< 70 dB
Shaking speed (motor revolutions):
= 685 rpm
Machine dimensions:
72cm (Width), 116cm (Height), 69cm (Depth), 210Kg (Weight)
Maximum can weight:
35 kg
Maximum can dimensions:
HxWxD 440x350x350 mm. Within the limits, also squared and oval cans can be shaked.
Minimum cans height:
65 mm
Timer:
Electronic, programmable
Power supply:
0.75 kiwi 230V 50Hz
0.75 kiwi 115V 60Hz