FAST & FLUID MANAGEMENT srl
A Unit of Idex Corporation
11
14.4.Threaded shafts and springs lubrication
Recommended lubricants
Use a generic adhesive yellow grease for open gears, grade N.G.L.I. 2.
How to proceed
•
Greasing
•
Switch the machine on (plug it into the
mains); door shall be closed.
•
Lower completely the upper plate by
pressing any of the start buttons (T1,
T2, T3). Before the shaking starts,
press Stop/Up.
•
Open the door.
•
Unplug the machine from the mains.
•
Remove the grease and possible dried
paint (see paragraph 12.3).
•
Then put some grease with a brush
on the springs between innermost
cradle and middle cradle.
•
Plug in the machine.
•
Close the door.
•
Press any of the start buttons (T1,
T2, T3), then Stop/Up buttons to
slide the upper plate on the
shafts.
•
Repeat the operation several times.
14.5. Lubrication of the eccentric shaft supports
Lubricate the eccentric shaft support through the lubrication nipples.
