FAST & FLUID MANAGEMENT srl
A Unit of Idex Corporation
9
Malfunctioning
-
When buttons T1, T2 or T3 are pressed if the door is open
-
The clamping sensor can no more detect the can while shaking is on
-
Time out. When the time between the start and the clamp ok signal (keyboard position 8) sensor is too
long.
-
Safety violated. If the door is forced; if the emergency button is pressed.
13. SAFETY
All operations are monitored by the resident program of the machine to guarantee the user working in safe
conditions. If safety system is violated, all machine movements (clamping, unclamping, shaking) immediately
stop. The following tables display signal/controls monitored by the machine.
Machine status
Function Signal
Function control
Off
No precaution
No functional check
Clamping (with or
without can)
Closed door
Door closed
Unclamping
Closed door
Door closed
Shaking
Door closed; clamping pressure sensor
activated
Door closed; clamping pressure sensor
activated
Stand by
No precaution
Door closed
14. MAINTENANCE AND CLEANING
During maintenance and check operations, please wear protection gloves and unplug the machine.
These operations must be carried out by qualified and trained technicians
and with the machine
unplugged (apart safety device check).
14.1. Table of periodic servicing.
Servicing every...
What to do
7 days
1 Month
1 Years
Safety devices check
Cap.14.2
Body cleaning
Cap.14.3
Inner parts cleaning
Cap.14.3
Threaded bars and springs lubrication
Cap.14.4
Eccentric shaft supports lubrication
Cap.14.5
14.2. Check of safety devices
DOOR LOCK (so micro-switch) when the machine is off and the door is locked
If you pull the handle, the door shall remain locked.
DOOR machine is on –plugged into the mains but not working
When the machine is switched on (plugged in) the upper plate unclamps till uppermost position.
If the upper plate is already in the uppermost position, the machine is ready to be loaded.
Open the door.
If you press T1, T2 or T3, the machine shall not start but emit a warning noise.
If you press Stop/Up, the machine shall not start but emit a warning noise.
