17
Revision date: 09.20.21
11291950
5
DRILL TUBE HOLES IN LIDS AND INSTALL LIDS—continued
Channel Preparation: Lids
4. Move to the supply manifold end of the frame opposite the drain manifold and attach one 106808 hanger in each position shown below using the 106808
Tek screws and 100442 driver. Do not overtighten!
5. Next, add a lid to each channel and arrange on the assembled frame as shown. Wipe the shavings from each lid (top side and underside) before sliding
the lid onto the channel.
Position all nutrient tube holes opposite the drain elbow of the channel.
112838 Tek Screw
106808
Hanger
6. Continue with the assembly and installation of the nutrient supply manifold.
A
A
A
B
B
B
106808
Hanger
9"
9"
Step 4
Step 5
A
B
Top View of Channels
