13
Revision date: 09.20.21
11291950
4
ASSEMBLE AND ATTACH 2" PVC DRAIN MANIFOLD—continued
Assemble and Attach 2" PVC Drain Manifold
8. Attach all prepared pvc tubes to the frame. Align marks made in Step 2 with the installed hangers. See left diagram below.
9. Assemble remainder of main drain manifold as shown in right diagram below. Dry fit all components before you permanently secure with pvc primer
and pvc cement. Apply primer and cement to each component and assemble. Allow cement to set.
ATTENTION:
Do not cement
the WF6717 slip caps to horizontal tubes. Caps are removed to periodically clean drain manifold as needed.
10. Continue with tank preparation.
High end
of drain
manifold.
Low
End
ATTENTION:
Do not cement
WF6717 fittings
to pvc pipes.
2" pvc pipe cut
to the required
length.
WF1386
WF1386
WF1576
WF6717
2" PVC
2" PVC
