26
26
11291950
Revision date: 09.20.21
10
ASSEMBLE AND ATTACH PVC DRAIN MANIFOLD
Complete these steps:
1. Measure, cut, and dry fit the remaining sections of the 2" pvc
drain manifold as shown in the photos below.
2. Once the fit is confirmed, disassemble and apply pvc primer
and pvc cement to drain tubes and fittings. See below.
ATTENTION:
Do not cement the extension tube that extends
through the lid from the WF1576 elbow. Extension tube must
remain free to remove for routine tank maintenance.
3. Allow the cement to set and continue with following procedure.
Assemble and Attach 2" PVC Drain Manifold
WF1576
No
Cement!
Cement
A
shrink holes
WF1576
WF1576
Cement
A
WF1576
Minimum 6" tube. Tube should
extend through lid at least 2" but
remain above solution level.
WF1576
2" PVC
2" PVC
