September 2015
www.farmscanag.com
AM-JACKAL-3
10
Connections
POWER CONNECTION
Power connection must come direct from the battery terminals.
WARRANTY IS VOID
if power is not
connected as described in this section.
1.
Connect power cable supplied
DIRECTLY TO BATTERY
2.
Ring terminals are used for battery connection and the bare end used to connect to the rear Jackal.
(Refer above image for power connection)
3.
Connect Ground to BATT -VE,
Terminal B11
using the
RED
with
BLACK
stripe wire
4.
Connect
+12
Volts (+battery terminal) to BATT +VE,
Terminal B10
using the
red
wire
5.
Ensure that the battery connection to the Jackal is +
12 Volts
Connecting 24V to the Jackal will VOID WARRANTY
Disconnect the terminal plugs from
the Jackal if
ARC WELDING
on
machinery
Summary of Contents for Jackal v2
Page 1: ......
