Farmi Forest Mastersplit WP30 Operating, Maintenance And Spare Parts Manual Download Page 65

Page: 65 / 68

Farmi Forest Corporation

Ahmolantie 6

FIN-74510 IISALMI

FINLAND

Farmi Forest Oy grants a 12-month warranty on all of its products, covering material and

manufacturing faults. The warranty comes into effect on the product’s delivery date.

The manufacturer is not liable for damages caused by:

•

misuse of the product

•

alterations or repairs made without the manufacturer’s permission

•

insufficient maintenance

•

non-original parts

The warranty does not cover wearing parts.

Send faulty parts, carriage paid, to the manufacturer for inspection. Repairs will be con-

ducted by Farmi Forest Oy or an authorized expert. The warranty is valid only if the bottom

part of this page is filled in and returned to the manufacturer within 14 days of receipt of the

product.

By returning the warranty certificate, you confirm that you have read and understood the

instruction manual that came with the product.

WARRANTY

Summary of Contents for Mastersplit WP30





































































Search results

Summary of Contents for Mastersplit WP30

Reviews:

Farmi Forest Mastersplit WP30, Operating, Maintenance And Spare Parts Manual, Page: 65 / 68

Search results

Summary of Contents for Mastersplit WP30

Reviews: