Farmi Forest Mastersplit WP30, Operating, Maintenance And Spare Parts Manual, Page: 18 / 68

MASTERSPLIT WP30
18
ARMS
COTTER
LOADER
HOOK
WOOD LOADER (extra equipment)
The length of the trunk to be loaded should be 2 m at
least and 4 m at most.
• Turn the loader’s hook to the front, unfasten the
cotter pin and turn the arms down.
• Lock the operating lever using the lock.
• The wood lifters must always be unlocked and the
wood lifter arms must be placed on the ground
before the machine is started.
• Roll or lift the stem onto the support arms. Then
fasten the loader’s hook to the stud on the moving
feed table (see figures below).
NOTE! Hold only the grip of the
loader’s hook as shown in the figu-
res.
• Then move the feed table carefully to the front;
in doing so, the stem is lifted. NOTE! Lift the stem
slowly and make sure it is kept balanced (see figu-
re below).
• After the stem has been lifted onto the feed table,
carefully move the moving feed table to the rear
position; in doing so, the loader’s hook and the lo-
ader are unfastened from the moving feed table.
• Unlock the operating lever. Now you can begin to
spilt wood.
CAUTION!
!