manualshive.com logo in svg

Farmi Forest Mastersplit WP30, Operating, Maintenance And Spare Parts Manual

The Farmi Forest Mastersplit WP30 is a versatile and efficient wood splitter designed for heavy-duty tasks. To ensure seamless operation, proper maintenance, and easy replacement of spare parts, make sure to download the comprehensive "Operating, Maintenance And Spare Parts Manual" for free from manualshive.com. Achieve optimal performance with this manual's guidance.

Share
Download
background image

MASTERSPLIT WP30

25

PREPARING THE MACHINE FOR HAULING

• 

Move the moving feed table to its front position 

and lock the operating lever (see page 12).

1. Re-attach the other end of the holding chain of the 

conveyor belt to the hook.

2. Lift the conveyor at the leveled position and fold it.

NOTE! Take hold of the conveyor at a safe distance to 

the joint (hinge) (as shown in the figure) to ensure that 

the hands cannot be crushed in the joint.

3. Turn the conveyor upright with the winch so that 

the conveyor’s extension part is be locked.

4. Lock the conveyor extension part and turn the con-

veyor in its hauling position unsing the winch.

Summary of Contents for Mastersplit WP30





































































Reviews:

No comments

Related manuals for Mastersplit WP30

Pow’R’kraft 65559 Instruction And Safety Manual preview
65559
Brand: Pow’R’kraft Pages: 17
PowRkraft 65575 Operator'S Manual preview
65575
Brand: PowRkraft Pages: 24
Texas A/S Power Split 2100 V User Manual preview
Power Split 2100 V
Brand: Texas A/S Pages: 72
Toro 22606 Operator'S Manual preview
22606
Brand: Toro Pages: 48
Cotech WS4T-37 Original Instructions Manual preview
WS4T-37
Brand: Cotech Pages: 56

Brands by name

Popular brands

Load more brands