38
│
58
Manual
MONSUN MC | ME
Clean bearings only under a small pressure. Any water intrusion into bearings reduces
their service life.
Pay attention to electric drive motors, sensors and electric installation. Avoid any direct
contact of water with these devices.
Do not spray the water directly on labels.
It is allowed to clean the seed drills only from outside. Stairs and platforms shall be cleaned after
every use of the machine. This considerably reduces the risk of injury.
If the water enters into the seed hopper:
open the emptying door on the dispenser,
disconnect the air hose from the dispenser in order to let the water flow out,
supply hoses and the seeds hopper can be cleaned only with compressed air.
When shutting down the machine for a long time, we recommend covering the machine with a
protective oil layer. This increases the machine service life. Use only biologically degradable oil.
Seed tubes
Blow the seed hoses and hopper with compressed air.
Sowing coulters and thrust wheels
Clean sowing coulters and thrust wheels with high-pressure cleaner. Do not aim water jets on
bearings.
Servicing
In order to keep the long service life of the equipment, we recommend treating of the machine with
protective oil layer after every season and for every storage.
Use only approved and biologically degradable oil, for example the rape oil.
Before oiling, cover tires of transport wheels. Oil can damage tires.
When using the compressed air for the machine cleaning a harmful dust from
mordants and fertilizers can be released. Due to this reason use a respirator
when cleaning the machine with compressed air.
Due to the harmful dust use a respirator with corresponding protection
class.
The harmful dust can be released when stained seeds are used.