23
│
58
Manual
MONSUN MC | ME
Calibration example:
setting based on the table of sowing at 60 (210 kg/ha wheat),
19 kg dosed by the sowing test 19 kg (required 21 kg),
we find out the relative difference between the dosed and required quantity – 10 %,
increase the setting by 10 % to the value 66,
repeat the sowing test if the dosed quantity does not correspond to the required quantity,
dispenser is calibrated.
DRIVING ON THE ROAD
Safety
Read following instructions before the machine preparation. Failure to observe them can cause
accidents and serious injuries.
Take care of the prescribed technical condition.
Provided you drive the machine on public roads the machine shall comply with valid operating
conditions for public roads. This includes:
-
Mounting of lights, warning and protective equipment.
-
With machine folded the brake lights and directional lights and the license plate shall be
visible.
-
Compliance with regulations for allowed transport width, weight and capability.
-
The empty hopper shall be covered with a tarpaulin.
The driver and owner of the machine is responsible for non-observance of operational conditions for
vehicles on public roads.
Do not forget to mount the injector knee after the calibration. Provided the
knee is not mounted, the seeds fall down directly from the diffusor to the
ground and is not transported to sowing coulters.
The accuracy of used scale shall be taken into account in weighting. Do not
overload the scale but weight only the quantity allowed for the weighting
scope.
Before driving on the road
When transporting the machine on public roads, the seed hopper shall be
empty. Driving on the road is allowed only with empty seed hopper (fertilizer
hopper). If the hopper is not emptied, it affects the driving properties of the
machine and can cause an accident.