Farm King 1460 Operator And Parts Manual Download

Page: 45 / 168

Operation - Fertilizer Applicator 1460

Entering And Leaving The Operator’s Position

Entering The Operator’s Position

Move to the operator’s position, start the engine and
release the parking brake.

Leaving The Operator’s Position

Park the tractor / equipment on a flat level surface.

Place all controls in neutral, engage the park brake, stop
the engine and wait for all moving parts to stop. Leave the
operator’s position.

Follow the instructions in your tractor’s operation
manual for the correct procedure.

AVOID INJURY OR DEATH

Before you leave the operator’s position:
•

Always park on a flat level surface.

•

Place all controls in NEUTRAL.

•

Engage the park brake.

•

Stop the engine and remove the key.

•

Wait for all moving parts to stop.

Summary of Contents for 1460









































































































































































Search results

Summary of Contents for 1460

Reviews:

Related manuals for 1460

Brands by name

Popular brands

Farm King 1460, Operator And Parts Manual

Search results

Summary of Contents for 1460

Reviews:

Related manuals for 1460

Brands by name

Popular brands