Farm King 1460 Operator And Parts Manual Download Page 36

Page: 36 / 168

Assembly - Fertilizer Applicator 1460

Figure 14

Loosen and remove the two bolts (Item 1)

[Figure 14]

that hold the spindle / hub assembly to the axle sub-
frame. Slide the assembly in or out to the desired row
spacing.

Replace the bolts and lock nuts with new bolts and lock
nuts.

Tighten all axle adjustment bolts to the required torque
(See “HARDWARE TORQUE VALUES” on page 155.).

Replace any bolts or lock nuts that have signs of physical
damage, especially noting damage due to corrosion.

Remove jack stands and braces and lower the unit to the
ground.

Repeat for the other side making certain the same center
line distance is maintained.

B-11010

Always replace the adjustment bolts with new bolts
and lock nuts.

Summary of Contents for 1460









































































































































































Search results

Summary of Contents for 1460

Reviews:

Related manuals for 1460

Brands by name

Popular brands

Farm King 1460, Operator And Parts Manual

Search results

Summary of Contents for 1460

Reviews:

Related manuals for 1460

Brands by name

Popular brands