Farm King 1460, Operator And Parts Manual

Page: 29 / 168

Assembly - Fertilizer Applicator 1460
29
COMPONENT INSTALLATION
Preparing For Assembly
Connect the fertilizer applicator to the tractor. (See
“Connecting The Fertilizer Applicator To The Tractor” on
page 46.)
Move the tractor, fertilizer applicator and coulters to an
area large enough that will allow the toolbar and wings to
be fully extended and sufficient clearance for forklift
access.
Park the tractor / equipment on a flat level surface.
Place all controls in neutral, engage the park brake, stop
the engine and wait for all moving parts to stop. Leave
the operator’s position.
1460 fertilizer applicators are shipped without some
components installed due to transporting height
and width restrictions.
• Using the packing list, locate and count the
individual components and verify that you have
received the correct number of each component.
• Check all the components for damage. If any
components are damaged or missing, contact
your Farm King dealer.
AVOID INJURY OR DEATH
Before moving the tractor, look in all directions and
make sure no bystanders, especially small children
are in the work area. Do not allow anyone between
the tractor and the equipment when backing up to
the equipment for connecting.
AVOID INJURY OR DEATH
Before you leave the operator’s position:
•
Always park on a flat level surface.
• Place all controls in NEUTRAL.
• Engage the park brake.
• Stop the engine and remove the key.
• Wait for all moving parts to stop.
AVOID INJURY OR DEATH
Wear safety glasses to prevent eye injury when any
of the following conditions exist:
• When fluids are under pressure.
• Flying debris or loose material is present.
• Engine is running.
• Tools are being used.