Farm King 1460, Operator And Parts Manual

Page: 30 / 168

Assembly - Fertilizer Applicator 1460
30
NOTE: Make sure the quick couplers are fully
engaged. If the quick couplers do not fully
engage, check to see that the couplers are the
same size and type.
NOTE: Hydraulic hoses marked with two colored
markers (tape) is the pressure line. Hydraulic
hoses marked with single colored marker
(tape) is the return line.
Figure 2
Connect the Blue (Work Circuit) and Red (Transport
Circuit) marked hydraulic hoses (Items 1 & 2)
[Figure 2] .
NOTE: Do not connect the hydraulic hoses (pump)
with White markings. Doing so, could result in
damage to the components.
1. Work Circuit (Blue): Raise / Lower Toolbar.
2. Transport Circuit (Red): Fold / Unfold Wings.
3. Pump Circuit (White): Pump.
Move to the operator’s seat and start the engine. (See
“Entering And Leaving The Operator’s Position” on
page 45.)
Engage the tractor hydraulics. Adjust the maximum
hydraulic flow to the “work” and “transport” circuits to a
maximum of 6 gpm. (See the tractor’s operator’s manual
for the correct procedure.)
Unfold the wings with “Transport Circuit” (hydraulic hoses
with the “Red” markers). (See “Unfold Wings” on
page 52.)
Raise the toolbar with the “Work Circuit” (Hydraulic hoses
with the “Blue” markers.)
Stop the engine, wait for all moving parts to stop and
leave the operator’s position.
HIGH PRESSURE FLUID HAZARD
To prevent serious injury or death from high
pressure fluid:
• Relieve pressure on system before repairing or
adjusting.
• Wear proper hand and eye protection when
searching for leaks. Use wood or cardboard
instead of hands.
• Keep all components in good repair.
• Contain and dispose of any oil leakage in an
environmentally safe manner.
• Thoroughly clean the quick couplers before
making connections. Dirt can quickly damage
the system.
B-0035
1
2
3