background image

Safety - Fertilizer Applicator 1460

25

SAFETY SIGN-OFF FORM

Farm King follows the general Safety Standards specified by the American Society of Agricultural and Biological
Engineers (ASABE) and the Occupational Safety and Health Administration (OSHA). Anyone who will be operating and /
or maintaining the 1460 fertilizer applicator must read and clearly understand ALL Safety, Operating and Maintenance
information presented in this manual.

Annually review this information before the season start-up and make these periodic reviews of SAFETY and
OPERATION a standard practice for all of your equipment. An untrained operator is unqualified to operate this machine.

The following sign-off sheet is provided for your record and to show that all personnel who will be working with the
equipment have read and understand the information in this Operator And Parts Manual and have been instructed in the
operation of the equipment.

SIGN-OFF SHEET

Date

Employee’s Signature

Employer’s Signature

Instructions are necessary before operating or servicing equipment. Read and understand the
Operator And Parts Manual and safety signs (decals) on equipment. Follow warnings and
instructions in the manuals when making repairs, adjustments or servicing. Check for correct
function after adjustments, repairs or service. Untrained operators and failure to follow instructions
can cause injury or death.

Summary of Contents for 1460









































































































































































Reviews: