Farlink IP Camera – FL301 / FL501
8
Ethernet link is ok, the Ethernet indication LED on the front side will be blue light.
4. Reset button – this is the button to reset the Farlink IP Camera to default factory
settings. You need to use a small stick like pencil or tooth stick to press the reset
button for more than 3 seconds to enable the reset function. Usually when you
forgot the administrator password, you will probably need to do these reset action
to reset to the default factory settings. Please refer to section 3.19 for more
details.
5. Wall mount – these are the slots to hang the Farlink IP Camera on the ceiling or on
the wall.
6. Antenna – this is the 802.11 b/g wireless antenna.
7. Digital I/O: (For FL501 only) one digital input and one digital output is provided to
give users control to alarm speaker or to signal alarm detection.
8.
Micro-SD card slot: (For FL501 only) for inserting the micro SD-Card. (support up
to 16G bytes)
FL501
_________________________________________
FL301
Figure 2-2: Major components in the back panel
Summary of Contents for FL301
Page 20: ...Farlink IP Camera FL301 FL501 20 Figure 3 6 Network settings page for fixed IP address ...
Page 23: ...Farlink IP Camera FL301 FL501 23 Figure 3 9 WiFi testing page ...
Page 34: ...Farlink IP Camera FL301 FL501 34 Figure 3 17 SD Card information page ...
Page 41: ...Farlink IP Camera FL301 FL501 41 Figure 3 23 Firmware upgrade status page ...
