Farlink IP Camera – FL301 / FL501
29
username and password fields could be left empty if no authentication is needed
for the SMTP server.
7.
SMTP server test
– after the settings are filled, you could press “SMTP server
test” to check if all the settings are correct.
8.
Send FTP message
– if this item is enabled, the Farlink IP Camera will send out a
jpeg picture file to the specified ftp account.
9.
FTP server
– this is the FTP server address to receive the jpeg file.
10.
FTP username/password
– this is the username/password to login into the FTP
server, so, this triggered jpeg file will be allowed to reach this FTP server.
11.
Remote folder
– the jpeg file will be put under this folder of the FTP server.
When this modification is “Save & Apply”ed, it works immediately, but all the
connected video viewing users will be disconnected.
The default setting is “Disable”.
Figure 3-13: Email/FTP Alarm page
Summary of Contents for FL301
Page 20: ...Farlink IP Camera FL301 FL501 20 Figure 3 6 Network settings page for fixed IP address ...
Page 23: ...Farlink IP Camera FL301 FL501 23 Figure 3 9 WiFi testing page ...
Page 34: ...Farlink IP Camera FL301 FL501 34 Figure 3 17 SD Card information page ...
Page 41: ...Farlink IP Camera FL301 FL501 41 Figure 3 23 Firmware upgrade status page ...
