Farlink IP Camera – FL301 / FL501
5
1. Introduction
The Farlink IP Camera is designed with the “user-friendly” idea deep in mind.
The user can install the Farlink IP Camera easily on his/her home network and then
access the Farlink IP Camera anywhere in the world through the accompanied video
management software - FarlinkView program without setting some complicated DNS
name or changing the router’s settings. It’s just a
Plug & Play
action.
(Model - FL501)
With pan/tilt support, users can monitor the video in a much
larger viewing angle range.
For indoor surveillance and remote monitoring, the Farlink IP Camera provides
the best image quality in its class, and excellent performance. The Farlink IP Camera
also provides the best bandwidth efficiency, it offers
640x480 resolutions
,
30 fps
frame rate,
real MPEG4
image compression ability. The
built-in microphone
enables remote users to not only view, but also listen for additional monitoring
options.
With 3GPP/ISMA support, users can see the video of the Farlink IP Camera on
any
3G mobile phone
anywhere, anytime. The big difference is that there is software
for downloading to the mobile phone so that the fixed IP address is not needed for the
Farlink IP Camera. The video settings including frame rate, resolution and bandwidth
could be different for PC monitoring and mobile viewing.
(Model - FL301)
With the very low light sensitive video sensor and IR LEDs,
the IP Camera can work day and night, satisfying all Internet Household Guardian and
indoor surveillance needs.
The
NAS storage
function can easily turn any NAS device to a NVR device. The
schedule function provides full scheduling of email/ftp sending, motion detection and
NAS recording event. With the built-in Web server, the Farlink IP Camera can also be
managed from a standard web browser on a Windows computer. With the ActiveX
support, users can also see the
video display on the Windows IE browser
.
The Farlink IP Camera provides both wireless IEEE 802.11 b/g and wired
Ethernet network interfaces for flexible installation. It supports the WEP and WPA
(Wi-Fi Protected Access) security modes to provide the best security for wireless
networks. It provides
motion detection
function. Users can easily setup this function
and receive the notification with the snapshot images through email and/or ftp when
some motion events are detected.
The Farlink IP Camera is ideal for securing small businesses, home offices and
residences over a local area network and/or the Internet.
Summary of Contents for FL301
Page 20: ...Farlink IP Camera FL301 FL501 20 Figure 3 6 Network settings page for fixed IP address ...
Page 23: ...Farlink IP Camera FL301 FL501 23 Figure 3 9 WiFi testing page ...
Page 34: ...Farlink IP Camera FL301 FL501 34 Figure 3 17 SD Card information page ...
Page 41: ...Farlink IP Camera FL301 FL501 41 Figure 3 23 Firmware upgrade status page ...
