Farlink IP Camera – FL301 / FL501
25
3.6. Video Settings
The Farlink IP Camera is designed to provide high quality video for viewing from
FarlinkView software. In this page, you can modify some settings related to the video
viewing:
1.
Password (play video)
– this is the password needed for viewing the video.
It is
recommended to change the video password for security purposes.
2.
Internet speed
– this is the Internet bandwidth of your network environment.
Higher value will generate higher video quality. But if your internet connection
could not provide more bandwidth than the specified value, the video quality could
degrade. So, please
key in a value that is lower than your internet bandwidth
.
3.
Select resolution & frame rate automatically
– you can let the system select the
suitable video resolution and frame rate automatically for you. The selection is
based on the “Internet speed” value. This is the recommended default setting.
4.
Resolution
– there are three choices: 160x120, 320x240 and 640x480. If you
decide to choose the value manually, you can choose one of the three values. But,
please be advised that if the Internet speed is slow (low value), high resolution
(640x480) or frame rate could cause very bad video quality.
5.
Frame rate
– the video frame display rate. Higher value means faster refresh and
continuity in the video display.
6.
Favor/Preference
– choose between “Video motion” and “Image quality”. When
the real bandwidth is not enough for the selected “Internet speed”, the system will
need to degrade the video motion or image quality. This selection will decide if the
user want to maintain the “video motion” or “image quality” when the internet
speed is not good enough.
7.
Brightness
– the brightness of the video, lower value means darker display.
8.
Sharpness
– the sharpness of the video, higher value means sharper video.
9.
Low light sensitivity
– The low light sensitivity could be normal, high or very high.
When the low light sensitivity is high, the system could see better video clearance
under low light situation, but the moving object will not be very clear under this low
light environment. Under very dark environment, set to “very high” will get better
video clearance.
The default value of this setting is “high”.
10.
Video color
– choose between “colored” and “black & white”.
11.
Video flip
– can do “normal” or
“flip” video display
, this is needed if the Farlink
IP Camera is hung on the ceiling or wall.
12.
Outdoor/Indoor video
– for better video display quality, modify this setting when
taking indoor or outdoor video.
The default setting is “Outdoor video”
, in most
cases; this is also ok for indoor usage. Under some special cases, there could be
some strip lines on the video display when the IP Camera is taking indoor video. In
this situation, change the setting to “Indoor video” will solve the problem. Please
Summary of Contents for FL301
Page 20: ...Farlink IP Camera FL301 FL501 20 Figure 3 6 Network settings page for fixed IP address ...
Page 23: ...Farlink IP Camera FL301 FL501 23 Figure 3 9 WiFi testing page ...
Page 34: ...Farlink IP Camera FL301 FL501 34 Figure 3 17 SD Card information page ...
Page 41: ...Farlink IP Camera FL301 FL501 41 Figure 3 23 Firmware upgrade status page ...
