203
(MT11 - Gb2006)
INTERNAL STATIONS
I
NTERCOMS *
V
IDEOINTERCOMS *
T
ELECOMMUNICA
TION
S
T
U
D
I
O
Table version
2) Pass the connection cable through the
hole on the back of the table adapter
TA7100 and block it with the cable
clamp supplied.
3) The arrows indicate the breaking points for the application of the
metallic frames (a) and for the video memory wires (b).
a
a
b
a
a
b
5) Screw the brackets WB7100 and WB700 on the table adapters.
4) Screw the 4 metallic frames on the table adapters and hook the 2
plastic frames to them (see drawing 4 on page 201).
6) Hook the monitor and intercom according to the instructions on
pages 199 and 200 (point 3 to 8) and the video memory according to
the instructions on page 186 (point 4 to 7).
When connecting the wires on the terminal boards of bracket WB7100
(point 6), mark the colour/terminal combination on the junction box.
2
1) Apply the 12 anti-slip rubber pads supplied in
their housing under the base of the table adapt-
ers TA7100 e TA700.