Farfisa ST 4231, Technical Manual

Page: 216 / 259

214
(MT11 - Gb2006)
Si 21MT/1
I
NTERCOMS
*
V
IDEOINTERCOMS *
T
ELECOMMUNICA
TION
MIXED INTERCOM/TELEPHONE SYSTEM CONNECTED TO ONE EXTERNAL DOOR STATION
Q.ty Article Description
... KM 810W Compact series intercom with 1 call button
... ST 720W Studio series modular intercom
... PT 510EW Project series intercom with 1 call button
... PT 526EW Project series modular intercom
... ST740W Studio series telephone
... WB700 Bracket for telephone
... FT11D Intercom-telephone interface
... FT105P-FT208P PABX
... ES60-ES65 Intercom-telephone interface for PABX
1 PRS240 Power supply with electronic ringing generator
1 PA ** Door release push-button (optional)
1 SE ** Electric door lock (12VAC-1A)
Door station series Mody (for right item set see on pages 16÷19)
1 row 2 row
... MD71÷74 MD71÷74 Module frames with back box
1 MD10-11-12 MD10-122-124 Modules for electric door speaker
... MD21 ÷ 24 MD222 ÷ 228 Button modules
... MD20 - 50 MD20 - 50 Blank and info modules
1 MD82 ÷ 812 MD82 ÷ 812 Hood covers
1 MD92 ÷ 912* MD92 ÷ 912* Rain shelters with module frames
1 MD30 MD30 Electric door speaker (amplifier)
Door station series Matrix (for right item set see on pages 24 and 25)
... MA71÷73 Module frames with back box
1 MA10P-11P-12P Modules with integrated audio amplifier
... MA20-22-24 Blank and button modules
... MA61÷63 Front frames
... MA91 ÷ 93 * Rain shelters with module frames
Door station series Profilo (for right item set see on pages 28 and 29)
... PL71÷73 Module frames with back box
1 PL10P-11P-12P Modules with integrated audio amplifier
... PL20 ÷ 24 Blank and button modules
PA
SE
230V
127V
0
PRS240
X3
X2
xn
MD7.
MD100
MD200
MD2.
RP100
RP200
1
2
C+
X
C
1
2
UP11
UP100
UP12
UP200
P2
P1
... Refers to number of users.
* Rain shelters are used instead of back boxes and hood covers.
** Articles not supplied by ACI Farfisa.
Working instructions. See page 36.
Notes
- If the maximum number of extensions is 5, you can use
the PABX FT105P.
- For the connection of name-plate lamps, read notes 6,
7 and 8 of the installation instructions on page 35.
- For wires dimensioning refer to the installation recom-
mendations and table on page 35.
- For other types of push-button panels see pages 30
and 31 or the general catalogue.
Programming
When using the telephone interface FT11D with the
telephone ST740 it is necessary to programme the
buttons dedicated to the intercom functions (see page
204).
When using the PABX, the following programming must
be absolutely carried out:
- intercom interface activation
- activation to receive intercom calls
See page 210.
If the PABX is only used for the intercommunicating
service, without connection to the public telephone lines
(URB1 and URB2), it is necessary to deactivate the
incoming and outgoing external lines with the following
programming:
- how to assign incoming external lines
- how to assign outgoing external lines
See page 209.
Application diagram notes
When using the MD100, MD200, RP100, RP200 and UP
amplified external door stations, it is advisable to place this
diagram on the diagram of page 215 and line it up to the riser.
For the RP and UP series you can realise one- or two-way
systems; for the Mody series multi-family systems can be
obtained by adding the necessary quantity of push-button mod-
ules.
Warning.
- In the external door sta-
tions RP100 and RP200
cut the jumper W1.
- In the external door sta-
tions UP do not connect
the yellow wire and insu-
late it.
- For AC power supply wires
refer to the
instructions on page 35.