8 9
(MT11 - Gb2006)
INTERNAL STATIONS
I
NTERCOMS *
V
IDEOINTERCOMS
*
T
ELECOMMUNICA
TION
S
T
U
D
I
O
6) Screw the brackets WB7100 and WB700 to the table adapters.
Table version
1) Apply the 8 anti-slip rubber pads in their housings under the base of
table adapters TA7100 and TA700.
4) Screw the 2 metallic frames to the desk adapter TA7100 and hook
the plastic frame to them.
2) Pass the connection cable through the
hole in the back of the table adapter
TA7100 and block it with the cable
clamp.
7) Hook the monitor and intercom according to the
instructions on pages 87 and 88 (from point 3 to
10).
When connecting the wires to the terminal boards
of bracket WB7100 (point 7) you must mark the
colour/terminal combination on the junction box.
2
3) The arrows indicate the breaking points for the application of the
metallic frames.
c
5) Fix the table adapter TA700 to the 2 metallic frames.
