<
文档标题
>
The device is default configured in DHCP mode.
5.2
Line Configurations
A SIP line must be configured properly to be able to provide telephony service(SIP PBX). The line
configuration is like a virtualized SIM card. Just like a SIM card on a mobile phone, it stores the
service provider and the account information used for registration and authentication. When the
device is applied with the configuration, it will register the device to the service provider(SIP PBX)
with the server
’s address and user’s authentication as stored in the configurations.
To configure a SIP line manually, user may open the SIP line configuration screen through softkey
[Menu] -> [Settings] -> [Advanced Settings] -> [Accounts] -> [SIP1] / [SIP2] -> [Basic Settings] from
the standby screen.
NOTICE! User must enter correct PIN code to be able to advanced settings to edit line
configuration. (The default PIN is 123)
The parameters and screens are listed in below pictures.
Figure 9 - Configure SIP Proxy Server Address
Summary of Contents for X3SP
