Fanvil X3SP, User Manual

Page: 73 / 90

<
文档标题
>
signaling. You can also configure the phone to receive an RTP stream from pre-configured multicast
listening address(es) without involving SIP signaling. You can specify up to 10 multicast listening
addresses.
Table 6 - MCAST Parameters on Web
Parameters Description
Normal Call Priority Define the priority of the active call, 1 is the
highest priority, 10 is the lowest.
Enable Page Priority The voice call in progress shall take precedence
over all incoming paging calls.
Name Listened multicast server name
Host:port
Listened multicast server’s multicast IP address
and port.
8.19 PHONE / Time/Date
User can configure the device time settings in this page.
Table 7 - Time/Date Setting Parameters on Web
Parameters Description
Network Time Server Settings
Time Synchronized via SNTP Enable time-sync through SNTP protocol
Time Synchronized via DHCP Enable time-sync through DHCP protocol
Primary Time Server Set primary time server address
Secondary Time Server Set secondary time server address, when
primary server is not reachable, the device will
try to connect to secondary time server to get
time synchronization.
Timezone Select the time zone
Resync Period Time of re-synchronization with time server
12-Hour Clock Set the time display in 12-hour mode
Date Format Select the time/date display format
Daylight Saving Time Settings