Fanvil X3SP, User Manual

Page: 60 / 90

<
文档标题
>
supports two remote parties, Server=set up call
conference by dialing to a conference room on
the server
Server Conference Number Set the conference room number when
conference type is set to be Server
Transfer Timeout Set the timeout of call transfer process
Enable Long Contact Allow more parameters in contact field per RFC
3840
Enable Missed Call Log If enabled, the phone will save missed calls into
the call history record.
Response Single Codec If setting enabled, the device will use single
codec in response to an incoming call request
Use Feature Code When this setting is enabled, the features in this
section will not be handled by the device itself
but by the server instead. In order to control the
enabling of the features, the device will send
feature code to the server by dialing the number
specified in each feature code field.
Enable DND Set the feature code to dial to the server
Disable DND Set the feature code to dial to the server
Enable Call Forward Unconditional Set the feature code to dial to the server
Disable Call Forward Unconditional Set the feature code to dial to the server
Enable Call Forward on Busy Set the feature code to dial to the server
Disable Call Forward on Busy Set the feature code to dial to the server
Enable Call Forward on No Answer Set the feature code to dial to the server
Disable Call Forward on No Answer Set the feature code to dial to the server
Enable Blocking Anonymous Call Set the feature code to dial to the server
Disable Blocking Anonymous Call Set the feature code to dial to the server
Specific Server Type Set the line to collaborate with specific server
type, this is to be address more in
“X3G
Administration Guide
”
Registration Expiration Set the SIP expiration interval
Use VPN Set the line to use VPN restrict route
Use STUN Set the line to use STUN for NAT traversal