Fanvil X3SP, User Manual

Page: 70 / 90

<
文档标题
>
Enable Default Line If enabled, user can assign default SIP line for
dialing out rather than SIP1.
Enable Auto Switch Line Enable phone to select an available SIP line as
default automatically
DND Response Code Set the SIP response code on call rejection on
DND
Busy Response Code Set the SIP response code on line busy
Reject Response Code Set the SIP response code on call rejection
Play Talking DTMF Tone Play DTMF tone on the device when user
pressed a phone digits during taking, default
enabled.
Play Dialing DTMF Tone Play DTMF tone on the device when user
pressed a phone digits at dialing, default
enabled.
Caller ID Display Priority Change caller ID display priority. The default
priority is “Phonebook” > “SIP Display Name” >
“SIP URI”. User may select one of the options to
change the desired caller ID display priority.
Hotline Number Set the hot line number
Hotline Delay Set the hot line delay time.
Enable Silent Mode
Enable silent mode by selecting it, the phone
incoming call indicator will blink to remind that
there is a incoming call instead of playing ring
tone.
Disable Mute for Ring Disable mute for ring.
Action URL
NOTICE! Action URL is used for device event submitting with IPPBX system. The detail is
addressed in the
“X3G Administration Guide”
Block Out Settings
The user with Administrators privilege can set the rule to blocked some numbers from dialing out.
This setting is device-wide and applies to every user of the device.