Fanvil X3SP, User Manual

Page: 69 / 90

<
文档标题
>
call after specific delay.
Enable Intercom Mute Enable mute mode during the intercom call
Enable Intercom Tone If the incoming call is intercom call, the phone
plays the intercom tone
Enable Intercom Barge Enable Intercom Barge by selecting it, the phone
auto answers the intercom call during a call. If
the current call is intercom call, the phone will
reject the second intercom call
Emergency Call Number Configure the Emergency Call Number. Despite
the keyboard is locked, you can dial the
emergency call number
Enable Password Dial Enable Password Dial by selecting it, When
number entered is beginning with the password
prefix, the following N numbers after the
password prefix will be hidden as *, N stand for
the value which you enter in the Password
Length field. For example: you set the password
prefix is 3, enter the Password Length is 2, then
you enter the number 34567, it will display 3**67
on the phone.
Encryption Number Length Configure the Encryption Number length
Password Dial Prefix
Configure
the prefix of the password call
number
Restrict Active URI Source IP Set the device to accept Active URI command
from specific IP address. NOTICE! This feature
is usually used for device management and
will be described in
“X3G Administration
Guide
”
Push XML Server Configure the Push XML Server, when phone
receives request, it will determine whether to
display corresponding content on the phone
which sent by the specified server or not.
Allow IP Call If enabled, user can dial out with IP address
Enable Multi Line Enable phone to make calls for 10 lines max, or
disable for 2 lines max.