Fanvil i504 Series, User Manual, Page: 80 / 95

79
15.3 Relay Output
Relay output control interface: Used to control electric locks, alarm systems, etc.
The relay output can be triggered via SMS, active URI, call status, etc., and will reset
after the configured timeout period.
Users can modify the output port settings via the web interface under [Security
Settings] >> [Alert].
Parameters Description
Enable Logs Enable or disable LOG
Triggered by
URI Ringtone
Whether to play a prompt ringtone when the relay output port is
triggered by URl.
Triggered By
SMS Ringtone
Whether to play a prompt ringtone when the relay output port is
triggered by SMS
Standard
Status
"Whether the default state of the relay is normally closed or normally
open is recommended to be kept as default. The choice between
normally closed and normally open can be made by connecting to the
NC/NO port of the relay.
Output
Duration
The duration of the relay output trigger is set to 5 seconds by default.
After 5 seconds, it returns to the standard state."
Trigger by
active URI
Enable or disable URI triggering.
Sending commands from a remote device or server, if correct,
triggers/resets the corresponding output port.
Trigger
Message
Messages Triggered by Output Port
Reset
Message
Messages Sent on Reset