Fanvil i504 Series, User Manual, Page: 13 / 95

12
C. Secure the bracket to the wall with four TA4*30mm screws.
D. Installation of the wall-mount bracket is complete.

There is a junction box (86-type) on the wall.
A. Secure the bracket to the 86 box with two PM4*16mm screws.
B. Installation of the wall-mount bracket is complete.

Step 2
：
Connect peripherals. If additional input or output devices are needed,
connect them to the host via the connection cable.

Step 3 : Power on the device for testing. If it operates normally, align the slots on the
back of the host with the pins on the wall-mount bracket, then slide the host
downward to complete the installation.