Fanvil i504 Series, User Manual, Page: 16 / 95

15
③
-5
8 sets of alarm
input interfaces
RS485 interface(Reserve)
4.2 Setup Guide
After the device is powered on for the first time or restored to factory settings, a setup
guide will appear. You can set the language, time zone, and network.After selecting the
language and time zone in the setup guide interface, click [Next] to enter the network
settings interface. Depending on the user's network environment, you can choose
Ethernet or Wi-Fi, then click [Finish] to complete the setup guide.Clicking [Skip] or
[Skip All] will keep the device's default configuration.
4.3 Language Settings
The user can set the phone language through the phone interface or web
interface.Under factory settings, the initial language defaults to English.
Set language under factory settings:
Upon startup under factory settings, the device prompts a language selection dialog in
the setup guide interface. Users can choose the desired language and click [Next] or
they can click [Skip] to use the default language. (The default language is English.)
Set language in the device's menu interface:
Set language while the device is in standby mode.Click the corresponding button on the
screen. [Menu] >> [Settings] >> [Basic] >> [Language]
Set language in the web interface:
Log in to the device's web page, then set the language from the drop-down menu in the
top right corner of the page.
4.4 Standby Screen Instructions

The following image shows the default standby screen interface, which represents