Fanvil i504 Series, User Manual, Page: 78 / 95

77

Trigger Name, replace with the triggered name.
Input settings
Parameters
Description
Input 1 Enable or disable Input 1
Triggered by
When choosing the low level trigger (closed trigger), detect the input
port (low level) closed trigger.
When choosing the high level trigger (disconnect trigger), detect the
input port (high level) disconnected trigger.
Name Connected alarm name
Reset Code Enter the reset code to stop the alarm after it has been triggered.
Input Duration Set the Input change duration time, the default is 0 seconds.
Triggered
Behavior
Enable or disable the input port from sending messages to the server.
Event
Triggered events: When connected to a door magnet, select door
magnet; when connected to an indoor switch, select indoor switch.
Triggered
Ringtone
Supports ringtone selection: None, no ringtone triggered.
15.2 Short-circuit Input
Short-circuit input detection interface: Used for connecting devices such as switches,
infrared probes, door sensors, and vibration sensors;
When the short-circuit input is triggered, it can send a text message to a specified server
address, or make a call to a designated number, and play an alarm ringtone locally. This
facilitates quick response by management personnel.
Users can modify the configuration parameters related to the input ports through the web
interface by navigating to [Security Settings] >> [Alert].
Parameters Description
Basic Settings