Fanvil i504 Series, User Manual, Page: 39 / 95

38

User: The username required for ONVIF authentication.

Password: The password required for ONVIF authentication.

Click

in the top right corner to add.
Note
：
The access control or camera being scanned must have ONVIF functionality enabled.
If it's not enabled, it needs to be enabled before scanning and adding.
8.3 Video Linkage
The indoor unit can display the video from the bound access control or IP camera during
an incoming call or conversation. The video linkage function is configured via the web
interface, with the following steps:

Log in to the indoor station's web interface.Go to [Line] >> [Action Plan] .Set the
following parameters:

Action: Video.

Number: The number of the access control or the IP address of the access
control. When using an extension to call, enter the number; when using IP
calling, enter the IP address.

Type: Early, "Early" indicates video linkage before answering the call;
Connected, "Connected" indicates video linkage after answering the call.

Direction: Both, indicates video linkage for both incoming and outgoing calls;
Incoming, indicates video linkage only for incoming calls; Outgoing, indicates
video linkage only for outgoing calls.

Line: Auto, or select the corresponding local line.

Username: The username for RTSP authentication

Password: The password for RTSP authentication

URL: The complete address of the RTSP URL.