Fantic Motor TZ 125 2011, User Manual

Page: 58 / 72

58
Selecting the warning temperature
Note:
This step can only be taken on vehicles fi tted with the optional temperature
sensor. When the engine temperature exceeds the set value, the warning LED
on the left lights up.
Default value: 90 °C (190ºF)
Enter the value by pressing button 1 in succession. To go on to the next digit,
press button 3. Con fi rm by pressing button 2.
Resetting the display functions after each use of the vehicle.
After each use of the vehicle, the following functions can be reset simultane-
ously:
- Maximum speed
- Distance
- Chronometer
- Maximum temperature
- Maximum rpm
Con fi rm the reset by pressing buttons 1 and 2 simultaneously.
Total reset of the display
Press the RESET button, using a suitable object. The display will start from
zero, except for the data for total accumulated distance and time.
Internal battery
The display is powered by an internal 3 V battery, type CR2032.
When the voltage in the internal battery drops below 2.45V, the screen dis-
plays LO.
To change the battery, open the cover behind the display, and use a coin to
unscrew it counter-clockwise. Make sure that the positive terminal on the bat-
tery is facing upward.